Calculation of the Strength of the Front Support of a Motorcycle Motorcycle Using NASTRAN 4.5 Software

Authors

  • Evi Christiani Sitepu Politeknik Teknologi Kimia Industri
  • Diman Raymond Tambunan Politeknik Teknologi Kimia Industri (PTKI) Medan

DOI:

https://doi.org/10.68115/reprokimia.v1i2.43

Keywords:

Perhitungan Tumpuan, Stress (tegangan), Deformasi, Calculation of Supports, Deformation

Abstract

Finite Element Analysis is a numerical method that can be utilized to produce approximate (non-exact) solutions to calculations, so various techniques are needed to obtain the closest price to the exact price. Along with  the  rapid  development  of  computer  hardware,  it  allows  the  development  of  finite  element-based software. Currently, there are many commercial software based on the finite element method and one of them is NASTRAN, which can have a great influence on static and dynamic analysis calculations in overcoming calculation problems and several long iterations. The simulations carried out in this paper are the basis of discussion to be applied in various problems, especially for making designs on the rear pedestal of a bicycle with a pillion. In the simulation, the safe limit of the rear pedestal of the bicycle with the results of the simulation analysis obtained in the form of maximum total stress (stress) is 296.3 MPa.

Keywords: Calculation of Supports, Stress, Deformation.

References

Budynas, R & Nisbett, J.K. 2010. Shigley’s. Mechanical Engineering Design. Edisi 9. McGraw-Hill Science. New

York

Chen, L. & Li, S. & Chen, H. & Saylor, D.M. & Tong, S. (2017). Study on the Design Method of Equal Strength Rim Based on Stress and Fatugue Analysis Using Finite Element Method. Advances in Mechanical Engineering. 9(3): 1–11

M. A. Crisfield, M.A. 2000. Non-linear Finite Element Analysis of Solids and Structures. 1. England. John Wiley

& Sons

Maulana, A. & Ariatedja, J.B. (2019). Analisa Fatigue pada Rangka Sepeda Trandem dengan Menggunakan

Metode Elemen Hingga. JURNAL TEKNIK ITS. 8, (1): 2301-9271

Maria, R. (2016). Finite Element Based Fatigue Life Prediction. DOI: 10.13140/RG.2.1.3465.1288

NWM Bishop, Steinbeck, J. & Sherratt, F. 2000. Finite Element Based Fatigue Calculations. East Kilbride.

Published by NAFEMS Ltd, Whitworth Building, Scottish Enterprise Technology Park.

Rahman, M.M. & Ariffin, A.K. & Noor, M.M. & Bakar, R.A. & Malequw, M.A. (2018). Finite Element Based Fatigue Life Prediction of Cylinder Head for Two-Stroke Linear Engine Using Stress-Life Approach. Journal of Applied Sciences 8: 3316-3327

Saeed Moaveni, S. 1999. Finite Element Analysis : Theory and Application with NASTRAN. New Jersey.

Prentice Hall

Downloads

Published

2023-01-04

How to Cite

Sitepu, E. C., & Tambunan, D. R. (2023). Calculation of the Strength of the Front Support of a Motorcycle Motorcycle Using NASTRAN 4.5 Software. Jurnal Rekayasa, Teknologi Proses Dan Sains Kimia (REPROKIMIA), 1(2), 45–53. https://doi.org/10.68115/reprokimia.v1i2.43

Issue

Vol. 1 No. 2 (2022): Desember : Jurnal Rekayasa, Teknologi Proses dan Sains Kimia

Section

Volume 1 No 2 Tahun 2022

License

Authors who publish with Jurnal Rekayasa, Teknologi Proses dan Sains Kimia agree to the following terms:

  1. Authors retain copyright and grant the Jurnal Rekayasa, Teknologi Proses dan Sains Kimia right of first publication with the work simultaneously This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.