BIODIESEL STORAGE TANK DESIGN 5000 KILO LITERS CAPACITY
Keywords:
tank, biodiesel, dimensions, capacity, level tangki, dimensi, kapasitasAbstract
One of the important equipment in the biodiesel industry is a storage tank. A storage tank is not only used as a tool to store a raw material or a product but also to maintain the quality of a product or a raw material. This research was conducted to design a biodiesel storage tank with a capacity of 5000 kiloliters. The design of this biodiesel storage tank includes selecting tank materials, calculating tank dimensions, determining tank levels (HHLL, HLL, LLL, and LLLL), and calculating the size of the liquid input/output nozzle. The biodiesel storage tank with a working capacity of 5000 kiloliters is made from Stainless Steel 304 with dimensions of 19.3 m for the height and inside diameter of the tank. Based on the process control philosophy, the alarm and interlock control system required by the tank consists of 4 types of alarms, Low Low Liquid Level (LLLL) at the height of 1000 mm, Low Liquid Level (LLL) at the height of 1450 mm, High Liquid Level (HLL) at the height of 18550 mm, and High High Liquid Level (HHLL) at the height of 18800 mm. Then, the inlet nozzle of the biodiesel flowing into the tank is 4" while the size of the biodiesel output nozzle is 10".
References
Akbar, I. F., Yudo, H., & Mulyatno, I. P. (2020). Analisis Kekuatan Tangki Penyimpanan Crude Oil 38T-104 Berbentuk Silinder dengan Tipe External Floating Roof pada PT. Pertamina RU IV Cilacap. Jurnal Teknik Perkapalan, 8 (1): 96-104.
Allo, S. L., Hanifi, R., & Anjani, R. D. (2022). Proses Produksi Mixer Tank Kapasitas 500 L pada PT. XYZ. Jurnal Ilmiah Wahana Pendidikan, 8 (11): 230-242.
American Petroleum Institute Recommended Practice 14E (1991). Design and Installation of Offshore Production Platform Piping System. Fifth Edition.
American Petroleum Institute 650 (2007). Welded Steel Tanks for Oil Storage. Eleventh Edition.
American Petroleum Institute Recommended Practice 2350 (2005). Overfill Protection for Storage Tanks in Petroleum Facilities. Third Edition.
Brownell, L. E. (1959). Process Equipment Design. New York: John Wiley and Sons Inc.
Devita, L. (2015). Biodiesel sebagai Bioenergi Alternatif dan Prospektif. Agrica Ekstensia, 9 (2): 23-26.
Gulin, M., Uzelac, I., Dolejs, J., & Boko, I. (2017). Design of Liquid-Storage Tank: Results of Software Modeling vs Calculations According to Eurocode. Professional Paper (15): 85-97. doi: 10.13167/2017.15.8.
Komariah, L. N., Arita, S., Prianda, B. E., & Dewi, T. K. (2023). Technical Assessment of Biodiesel Storage Tank: A Corrosion Case Study. Journal of King Saud Universities – Engineering Sciences, 35 (3): 232-237.
Mahardhika, P. & Ratnasari, A. (2018). Perancangan Tangki Stainless Steel untuk Penyimpanan Minyak Kelapa Murni Kapasitas 75 m3. Jurnal Teknologi Rekayasa, 3 (1): 39-46.
Primalasita, D. V. & Sa’diyah, K. (2021). Perancangan Tangki Penyimpanan Nitrogen Kapasitas 0,0074 m3 pada Prarancangan Pabrik Kimia Asap Cair. Distilat Jurnal Teknologi Separasi, 8 (1): 1-10.
Primandita, S. (2019). Desain Ammonia Pressure Tank pada Pabrik Ethanolamine dengan Kapasitas 50.000 Ton/Tahun. Skripsi. Universitas Negeri Semarang.
Winarno, A. B., Prasojo, B., & Prayitno, M, M. E. (2017). Desain dan Pemodelan pada Storage Tank 50.000 kL (Studi Kasus PT. Pertamina Region V TBBM Tuban). Teknik Permesinan Kapal Politeknik Perkapalan Negeri Surabaya (Surabaya): 1-4.
