PERHITUNGAN KOMPOSISI OPTIMUM MATERIAL KOMPOSIT DENGAN FILLER TANDAN KOSONG SAWIT YANG DICETAK DENGAN ALAT KEMPA TEKAN PANAS BERDASARKAN SIFAT MEKANIKNYA
Kata Kunci:
Uji Mekanik, Uji Tarik, Komposit PolimerAbstrak
Dalam pembuatan komposit polimer yang terdiri dari matriks dan bahan pengisi, diperlukan pengetahuan akan komposisi optimum campuran bahan yang digunakan. Tujuan dari mengetahui komposisi campuran tersebut adalah untuk menghasilkan komposit polimer yang dapat difungsikan sesuai dengan harapan awalnya. Salah satu metode karakterisasi dasar dari komposit polimer adalah dengan mengetahui sifat mekanik material komposit polimer tesebut. Metode yang paling umum digunakan untuk mengetahui sifat mekanik adalah dengan uji tarik. Uji tarik dilakukan untuk mengetahui kekuatan tarik dari komposit polimer dan nilai kemuluran atau kelenturan dari material komposit polimer tersebut. Komposit polimer berbahan dasar polistirena dengan bahan pengisi limbah pabrik kelapa sawit yang dicetak dengan menggunakan alat kempa tekan panas hasil rakitan pada penelitian tahun 2022, dilakukan dalam beberapa variabel pencampuran PS-g-MA, sludge dan abu boiler yaitu: 100% PS-g-MA, PS-g-MA:Sludge (60:40), PS-g-MA:Sludge:Abu Boiler (60:30:10), PS-g-MA:Sludge:Abu Boiler (60:25:15), PS-g-MA:Sludge:Abu Boiler (60:20:20), PS-g-MA:Sludge:Abu Boiler (60:15:25), PS-g-MA:Sludge:Abu Boiler (60:10:30), PS-g-MA:Abu Boiler (60:40). Dari hasil uji tarik dapat dilihat kondisi optimum dari material komposit yang dihasilkan dengan penambahan sludge dan abu boiler dari limbah pabrik kelapa sawit terhadap matriks polistirena tergrafting maleat anhidrida adalah pada kondisi PS-g-MA: Sludeg: Abu Boiler pada perbandingan 60:25;15 dengan nilai modulus young 856,752Mpa, nilai Gaya Tarik 6.057MPa dan Nilai Perpanjangan Putus 0,775%.
Referensi
Dechojarassri,D., Ratikant,N., Chroeanrat,S., Danwanichakul,P.2017.Mechanical Properties of natural rubber composite filled with starch sludge compared with others commercial fillers, International Journal of chemical Engineering and application, Vol.3, No.3 210-214.
Elda, P. Hidayani T. R, Akbar, A. 2017. Analysis Physical Properties of Composites Polymer from Cocofiber and Polypropylene Plastic Waste with Maleic Anhydrate as Crosslinking Agent, (IOP Conf.Series: Materials Science and Engineering 223, 2017) 012060
Elda P., Hidayani, T.R., Rahmad, Dedy. 2019. Potency of paper mill waste as recyclable polypropylene filled with coconut fiber composite for mitigational material, (Rasayan J. Chem Vol.12 No.3, 2019), pp. 1144-1150
Hidayani, T.R., dkk. 2022. Acoustic and Mechanical Properties of Polystyrene Composite Filled with Primary Sludge and Boiler Ash from Pulp Mill. Materiale Plastice. Vol 59 Number 2.
Hidayani, T.R., dkk. 2020. Karakteristik Plastik Biodegradable Dari Limbah Propilena Dan Pati Tandan Kosong Kelapa Sawit Melalui Metode Pencampuran Kering. Majalah Kulit Karet dan Plastik. 36(2), hal 65-72
ISO 11654:1997 Acoustics-Sound absobers for use in buildings – Rating of sound absorption
Kucmarski,MA.,Johnston,J.C.2011. Acoustic absorption in Porous Materials, NASA/TM, 216995.
Kutuk,M.A., Ogus,Z.A.2016. A research on effect of sewage sludge ash on the mechanical properties of composite material, Proceedings of the world congress on civil, structural, and enviromental engineering (CSEE), Prague, Czech Republic, Paper No.ICSENM 110, DOI: 10.11159/icsenm16.110
Mamtaz,H.,Fouldi,M.H.,Al-atabi,M.,& Namasivayam,S.N. 2016. Acoustic Absorption of Natural Fiber Composites.J.Eng., 1-11
Mohammadhosseini,H.2017.Durability performance of green concrete composites containing waste carpet fibers and palm oil fuel ash, Elsevier Journal cleaner production, 448-458.
Nimmagadda,V.K., Sarcar,M.M.M., Koona,R.2014. Investigation of dielectric properties of industrial waste reinforced particulate polymer composites, Hindawi Publishing Corporation Advances Materials and Engineering, Article ID 319741, 6 pages, http://dx.doi.org/10.1155/2014/319741
Purohit,A., Satpathy,A.2016. Epoxy matrix composite filled with micro-sized LD sludge: wear characterization and analysis, IOP Conf Series Material Science and Engineering, 115 012006, DOI: 10.1088/1757-899X/115/1/012006.
Soucy,J., Koubaa,A., Migneault,S., Riedl,B.2014. The potential of paper mill sludge for wood-plastic composites, Elsevier industrial corps and products, 54: 248-256.
Tsujiei,Y.,at all.2018. Particle dispersibility and sound propagation of ultrasounds for magnetic soft composites, Reactive and Functional Polymers, Volume 130, Pages 1-7.